EasyManua.ls Logo

A&D GF-1003A - Options and Perpheral Instruments

A&D GF-1003A
112 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
106
24-1 Options And Perpheral Instruments
Options
GXA-03: RS-232C interface insulation type
□ RS-232C Interface insulation type for expansion
GXA-04: Comparator output (Relay / with a Buzzer)
□ Outputs comparator results.
GXA-06: Analog voltage output
□ This option outputs a voltage of 0 to1V (or 0.2 to1V).
GXA-08: Ethernet interface
□ Enables the balance to communicate with computers on a network.
□ Multiple balances on a network can be controlled by one computer.
GXA-09: Built-in battery unit (Can be installed only at shipment)
□ Enables the balance to be used in an environment where the AC adapter can not be used.
□ Charging time is approximately 10 hours, and continuous use time is approximately 14 hours.
GXA-10: Glass breeze break
□ Breeze break unit with a glass door
GXA-12: Animal container kit
□ Container with depth to make it difficult for animals to edcape
GXA-13: Specific gravity measurement kit
□ Unit that enables easy weighing of the sample's weight in air and in water.
GXA-23-PRINT:Foot switch input for PRINT
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Foot switch of print function included. (AX-SW137-PRINT)
GXA-23-RE-ZERO:Foot switch input for RE-ZERO
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Foot switch of RE-ZERO function included. (AX-SW137-REZERO)
GXA-23-PLUG : External input interface
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Assembled stereo plug included.
Note: In order to use, it is necessary to solder the attached plug and the switch prepared by the
customer.
GXA-24: USB host interface (Can be installed only at shipment)
□ Stores the weighing value in the USB memory.
GXA-25: Static eliminator for GX-A/GF-A series
□ In addition to being used alone, this static eliminator unit can be built in to a large breeze break.
GXA-26: External IR switch
□ External non-contact switch that can operate PRINT and RE-ZERO key.
AX-GXA-31: Body cover(5 pieces)
□ Protective cover for standard accessories

Table of Contents