A&D GF-3002A User Manual

INSTRUCTION MANUAL
GX-A SERIES
GF-A SERIES
M
ulti-Function Balance
1WMPD4003475
ＧＸ－Ａ series
GX-203A/GX-303A/GX-403A/GX-603A/GX-1003A/GX-1603A
GX-2002A/GX-3002A/GX-4002A/GX-6002A/GX-10002A
GX-6001A/GX-10001A
ＧＦ－Ａ series
GF-203A/GF-303A/GF-403A/GF-603A/GF-1003A/GF-1603A
GF-2002A/GF-3002A/GF-4002A/GF-6002A/GF-10002A
GF-6001A/GF-10001A

A&D GF-3002A Specifications

General

Model	GF-3002A
Category	Scales
Manufacturer	A&D
Capacity	3000 g
Readability	0.01 g
Calibration	External Calibration
Repeatability (Standard Deviation)	0.01 g
Linearity	±0.02 g
Display	LCD
Power Supply	AC adapter (included)
Operating Temperature	5 °C to 40 °C (41 °F to 104 °F)
Units of Measurement	g, oz, dwt, ct, gn, ozt

Summary

Introduction

1-1 Features

Unpacking The Balance

2-1 Installing The Balance

Provides step-by-step instructions for setting up the balance.

2-2 Precautions

Lists important guidelines for optimal balance performance and accuracy.

2-3 During Use

Display Symbols and Key Operation

Key Operation

Explains balance control key functions and their usage.

Weighing

5-1 Basic Operation

Covers the fundamental steps for performing a weighing operation.

5-2 Counting Mode (PCS)

Explains how to use the balance for counting items based on unit mass.

5-3 Percent Mode (%)

Details how to perform percentage weighing against a reference mass.

5-4 Animal Weighing Mode (Hold Function)

Describes the function for weighing moving objects like animals.

Impact Detection Function

Response Adjustment / Self Check Function

7-1 Response Adjustment

7-2 Self-Check-Function / Automatic Setting Of Minimum Weight Value

Calibration

8-1 Automatic Self Calibration For The GX-A Series

Details automatic calibration based on ambient temperature changes.

8-2 One-Touch Calibration For The GX-A Series

Explains how to perform calibration using the internal mass.

8-3 Calibration Using An External Weight

Provides instructions for calibration using an external weight.

8-4 Calibration Test Using An External Weight

Function Switch And Initialization

9-2 Initializing The Balance

Function Table

10-1 Setting The Function Table

Guides users through configuring balance parameters via the function table.

10-2 Details Of The Function Table

Provides detailed descriptions of each function table item and parameter.

10-5 Comparator Function

Data Memory

12-1 Data Memory For Weighing Data

Statistical Calculation Mode

13-1 How To Use The Statistic Calculation

Guides on enabling and setting up statistical calculation mode.

13-2 Statistical Calculation Mode (Example Of Use)

Flow Measurement

14-1 How To Use Flow Measurement

Explains how to enable and configure flow rate measurement.

Gross Net Tare Function

15-1 Preparation Of Gross Net Tare Function

Minimum Weighing Warning Function

Density Measurement

Password Lock Function

20-1 Using Password Function

Explains how to enable and use the password protection feature.

20-2 Changing Password

20-3 Inputting Password When Turning On The Balance

Troubleshooting

22-1 Checking The Balance Performance And Environment

Guides on checking balance operation and environmental factors.

22-2 Error Codes

Lists and explains various error codes and their solutions.

22-4 Asking For Repair

Specifications

23-1 GX-A series 0.001g models

23-2 GX-A series 0.01g models

23-3 GX-A series 0.1g models

23-4 GF-A series 0.001g models

23-5 GF-A series 0.01g models

23-6 GF-A series 0.1g models