To Next PageTo Next Page
Need help?Do you have a question about the A&D GF-2002A and is the answer not in the manual?
Provides step-by-step instructions for correct balance installation and setup.
Lists essential precautions for optimal performance and accurate weighing.
Offers important notes and guidelines for accurate weighing during operation.
Details the function and operation of each key on the balance interface.
Provides a step-by-step guide for performing basic weighing operations.
Explains how to use the counting mode for determining object count based on unit mass.
Details the percent mode for target weighing and sample variance checks.
Explains the hold function for weighing moving objects like animals.
Explains how to adjust response characteristics for stable weighing.
Covers self-diagnosis and setting minimum weighing warning values.
Details methods for calibrating the balance using internal or external weights.
Explains automatic calibration triggered by temperature changes for GX-A models.
Details the one-touch calibration method using the internal mass for GX-A models.
Provides steps for calibrating the balance with an external calibration weight.
Details the process of setting and modifying parameters within the function table.
Explains the configuration and operation of the comparator function for weighing results.
Explains how to generate and output GLP/GMP compliant reports.
Details the features and procedures for storing weighing data in memory.
Explains how to store calibration and test data in memory.
Provides instructions on enabling and performing statistical calculations.
Guides on enabling flow rate measurement and setting the flow rate unit.
Details flow value ranges by model and estimated flow rates based on Ct settings.
Lists and explains common error codes and their potential causes.
General