A&D GF-2002A - Options and Perpheral Instruments

106
24-1 Options And Perpheral Instruments
Options
GXA-03： RS-232C interface insulation type
□ RS-232C Interface insulation type for expansion
GXA-04： Comparator output (Relay / with a Buzzer)
□ Outputs comparator results.
GXA-06： Analog voltage output
□ This option outputs a voltage of 0 to1V (or 0.2 to1V).
GXA-08： Ethernet interface
□ Enables the balance to communicate with computers on a network.
□ Multiple balances on a network can be controlled by one computer.
GXA-09： Built-in battery unit (Can be installed only at shipment)
□ Enables the balance to be used in an environment where the AC adapter can not be used.
□ Charging time is approximately 10 hours, and continuous use time is approximately 14 hours.
GXA-10： Glass breeze break
□ Breeze break unit with a glass door
GXA-12： Animal container kit
□ Container with depth to make it difficult for animals to edcape
GXA-13： Specific gravity measurement kit
□ Unit that enables easy weighing of the sample's weight in air and in water.
GXA-23-PRINT：Foot switch input for PRINT
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Foot switch of print function included. (AX-SW137-PRINT)
GXA-23-RE-ZERO：Foot switch input for RE-ZERO
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Foot switch of RE-ZERO function included. (AX-SW137-REZERO)
GXA-23-PLUG : External input interface
□ External contact input terminal that can operate PRINT and RE-ZERO key.
Assembled stereo plug included.
Note: In order to use, it is necessary to solder the attached plug and the switch prepared by the
customer.
GXA-24： USB host interface (Can be installed only at shipment)
□ Stores the weighing value in the USB memory.
GXA-25： Static eliminator for GX-A/GF-A series
□ In addition to being used alone, this static eliminator unit can be built in to a large breeze break.
GXA-26： External IR switch
□ External non-contact switch that can operate PRINT and RE-ZERO key.
AX-GXA-31： Body cover（5 pieces）
□ Protective cover for standard accessories