81
17.Underhook
The underhook can be used for magnetic materials or density measurement. The built-in underhook is
revealed by removing the plastic cap on the bottom of the balance.
Use the underhook as shown below.
Caution
□ Do not apply excessive force to the underhook.
□ When not in use, do not open the cover to prevent dust from getting into the balance.
□ Do not push the underhook upward.
□ The weighing pan, pan support and draft gate fall off, when turning over the balance.
Remove them first.
□ When not in use, attach the plastic cap to prevent dust from getting into the balance.
Cap
Underhook
(Hole diameter: approx. 4mm)
Bottom of the balance
To Next Page
Loading...
