97
22-3 Other Display
When this indicator ( ) blinks, automatic self calibration is required. The
indicator blinks when the balance detects changes in ambient temperature. If
the balance is not used for several minutes with this indicator blinking, the
balance performs automatic self calibration. The blinking period depends on
the operating environment.
Advise The balance can be used while this indicator is blinking. We recommend that you
perform automatic self calibration for precision weighing.
22-4 Asking For Repair
If the balance needs service or repair, contact your local A&D dealer.
The balance is a precision instrument. Use much care when handling the balance and observe the following
when transporting the balance.
□ Use the original packing material for transportation.
□ Remove the weighing pan, pan support, breeze break ring and dust plate from the main unit.
To Next Page
Loading...
