96
Display Error code Description
An undefined command was received.
Confirm the command.
ＥＣ，Ｅ０２
Not ready
A received command can not be processed.
Example:
The balance received a "Q" command, but not in the
weighing mode.
The balance received a "Q" command while processing
a RE-ZERO command. Adjust the delay time to
transmit a command.
ＥＣ，Ｅ０３
Timeout error
If the timeout parameter is set to "t-Up1", the balance did not
receive the next character of a command within the time limit
of one second. Confirm the communication.
ＥＣ，Ｅ０４
Excess characters error
The balance received excessive characters in a command.
Confirm the command.
ＥＣ，Ｅ０６
Format error
A command includes incorrect data.
Example:
The data is numerically incorrect.
Confirm the command.
ＥＣ，Ｅ０７
Parameter setting error
The received data exceeds the range that the balance can
accept. Confirm the parameter range of the command.
To Next Page
Loading...
