103
23-6 GF-A series 0.1g models
GF-10001A GF-6001A
Weighing capacity 10200g 6200g
Maximum display 10208.4g 6208.4g
Minimum display 0.1g
Repeatability（Standard deviation）
0.1g
Linearity
±0.1g
Stabilization time
（FAST setting, good environment)
Approx. 1 sec
(500g: Approx.0.8 sec)
Sensitivity drift
±2ppm/℃ （Automatic self caliration OFF）
Accuracy after calibration with
internal mass※
±0.5g (5000g)
Operating environment
5℃ to 40℃, 85%RH or less （No condensation）
Display refresh rate 5 times/second or, 10 times/second or 20 times/second
Counting
mode
Minimum unit mass 0.1g
Number of samples 5,10,25,50 or 100 pieces
Percent
mode
Minimum 100% mass 10.0g
Minimum 100% display 0.01 %, 0.1 %, 1 % (Depends on the reference mass stored.)
Carat
Weighing capacity 50100ct 31000ct
Minimum display 0.5ct
Monme
Weighing capacity 2720mom 1653mom
Minimum display 0.5mom
Interface
RS-232C、USB
External calibration weight 500g
1000g
(1000g interval)
10000g
500g
1000g
(1000g interval)
6000g
Weighing pan 165mm x 165mm
External dimensions
212（w）x317（D）x93（H）
Power supply（AC adapter）
Power consumption: Approx. 30VA (supplied to the AC adapter )
Confirm that the adapter type is correct for the local voltage and power
receptacle type.
Weight
Approx.5kg
To Next Page
Loading...
