A&D GF-2002A - GX-A Series 0.1 G Models

100
23-3 GX-A series 0.1g models
GX-10001A GX-6001A
Weighing capacity 10200g 6200g
Maximum display 10208.4g 6208.4g
Minimum display 0.1g
Repeatability（Standard
deviation）
0.1g
Linearity
±0.1g
Stabilization time
（FAST setting, good
environment)
Approx. 1 seconds
(500g: Approx.0.8seconds)
Sensitivity drift
±2ppm/℃ （Automatic self calibration:OFF）
Accuracy after calibration with
internal mass※
±0.5g (5000g)
Operating environment
5℃ to 40℃, 85%RH or less （No condensation）
Display refresh rate 5 times/second or, 10 times/second or 20 times/second
Counting
mode
Minimum unit
mass
0.1g
Number of
samples
5,10,25,50 or 100 pieces
Percent
mode
Minimum 100%
mass
10.0g
Minimum 100%
display
0.01 %, 0.1 %, 1 % (Depends on the reference mass stored.)
Carat
Weighing
capacity
50100ct 31000ct
Minimum
display
0.5ct
Monme
Weighing
capacity
2720mom 1653mom
Minimum
display
0.5mom
Interface
RS-232C、USB
External calibration weight 500g
1000g
(1000g interval)
10000g
500g
1000g
(1000g interval)
6000g
Weighing pan 165mm x 165mm
External dimensions
212（w）x317（D）x93（H）
Power supply（AC adapter）
Power consumption: Approx. 30VA (supplied to the AC adapter )
Confirm that the adapter type is correct for the local voltage and power receptacle
type.
Weight
5kg
※ The operating environment does not include excessive change of ambient temperature, humidity,
vibration, drafts, magnetic fields and static electricity.
The internal mass may change due to corrosion or other damage caused by the operating
environment, or due to aging.