A&D GF-2002A - GF-A Series 0.001 G Models

101
23-4 GF-A series 0.001g models
GF-1603A GF-1003A GF-603A GF-403A GF-303A GF-203A
Weighing capacity 1620g 1100g 620g 420g 320g 220g
Maximum display 1620.084g 1100.084g 620.084g 420.084g 320.084g 220.084g
Minimum display 0.001g
Repeatability（Standard
deviation）
0.002g(1600g)
0.001g(1000g)
0.001g
Linearity
±0.003g ±0.002g
Stabilization time
（FAST setting, good
environment)
1600g: Approx. 1.5 sec
5g: Approx. 0.8 sec
Approx.1 sec
(5g: Approx.0.8sec)
Sensitivity drift
±2ppm/℃
Operating environment
5℃ to 40℃, 85%RH or less （No condensation）
Display refresh rate 5 times/second or, 10 times/second or 20 times/second
Counting mode Minimum
unit mass
0.001g
Number of
samples
5,10,25,50 or 100 pieces
Percent mode
Minimum
100% mass
0.100g
Minimum
100%
display
0.01 %, 0.1 %, 1 % (Depends on the reference mass stored.)
Carat
Weighing
capacity
8100ct 5500ct 3100ct 2100ct 1600ct
Minimum
display
0.05ct
Monme
Weighing
capacity
432mom 293mom 165mom 112mom 85mom 58mom
Minimum
display
0.005mom
Interface
RS-232C、USB
External calibration weight 50g
100g
(100g interval)
1600g
50g
100g
(100g interval)
1000g
50g
100g
(100g interval)
600g
50g
100g
(100g interval)
400g
50g
100g
200g
300g
50g
100g
200g
Weighing pan 128mm x 128mm
External dimensions
212（w）x317（D）x93（H）
Power supply（AC adapter）
Power consumption: Approx. 30VA (supplied to the AC adapter )
Confirm that the adapter type is correct for the local voltage and power receptacle type.
Weight
5kg