Need help?Do you have a question about the A&D GP-20K and is the answer not in the manual?
Manual structure overview.
Key features of the balance.
Regulatory compliance information.
Procedure for unpacking the balance.
Steps for installing the balance.
Safety and operational guidelines before use.
Safety and operational guidelines during use.
Safety and operational guidelines after use.
Precautions related to the power supply.
Explanation of balance display symbols and keys.
Description of the Smart Range function.
List of available weighing units.
Procedure to select and arrange weighing units.
Step-by-step guide for basic kilogram weighing.
Explanation of the counting mode operation.
Explanation of the percent mode operation.
Guide to weighing moving objects.
How to use the accumulation function.
Automatic balance performance adjustment and check.
Procedure for manual response adjustment.
Overview of available calibration modes.
How automatic calibration works based on temperature.
Calibration using the built-in internal mass.
Procedure for calibrating with an external weight.
Testing accuracy with an external weight.
Method to correct the internal mass value.
Setting function switches to protect parameters.
Restoring balance parameters to factory settings.
Explanation of the function table menu structure.
Key and display elements for function table navigation.
Detailed breakdown of function table items and parameters.
Settings for environment and display parameters.
Configuration options for data output modes.
Specification of data output formats.
Details on added data fields in output formats.
Illustrative examples of data output formats.
Setting and using the internal clock and calendar.
How to set up and use the comparator function.
Including comparison results in data output.
Using the display for comparison results.
Procedure to set a unique ID for the balance.
Information on generating and outputting GLP reports.
Important considerations for using data memory.
Storing weighing data in memory.
Storing calibration and test data.
Storing unit mass for counting operations.
Storing upper/lower limits for comparator.
Storing tare values for quick recall.
Recalling stored data quickly via selection mode.
Confirming and storing recalled memory data.
Specs for RS-232C and external contact input.
Guide for connecting the AD-8121B printer.
Instructions for connecting to a PC.
How to use WinCT software for data transfer.
Capabilities of the balance with WinCT software.
Comprehensive list of balance control commands.
Explanation of response and error codes.
Using CTS and RTS signals for control.
Configuration options for RS-232C interface.
Steps to diagnose performance issues.
List and descriptions of balance error messages.
Procedure for requesting technical support.
Glossary of technical terms used in the manual.
To Next Page
General
