A&D GP-60K User Manual

GP SERIES
GP-12K/GP-20K /GP-30K/GP-32K
G
P-40K/GP-60K/GP-61K
G
P-100K/GP-102K
GP-30KS/GP-32KS
G
P-60KS/ GP-61KS/GP-100KS
Precision Balance
INSTRUCTION MANUAL
WM+PD4000273D

A&D GP-60K Specifications

General

Capacity	60 kg
Stabilization Time (Approx.)	2 seconds
Auto Power Off	Yes
Units of Measurement	kg, g, lb, oz
Power Supply	AC adapter / Battery
Display	LCD
Operating Temperature	0°C to 40°C

Summary

1. INTRODUCTION

1-1 About This Manual

Explains the manual's structure and content overview.

1-2 Features

Highlights key features and capabilities of the GP series balance.

1-3 Compliance

Compliance with FCC Rules

Details the balance's compliance with FCC regulations for radio frequency energy.

Compliance with EMC Directives

Outlines the balance's compliance with EMC directives for radio interference suppression.

2. UNPACKING THE BALANCE

2-1 Unpacking

Provides instructions for carefully unpacking the balance and its components.

2-2 Installing the Balance

Guides users through the physical installation and setup of the balance.

3. PRECAUTIONS

3-1 Before Use

Covers essential precautions for installing and preparing the balance for operation.

3-2 During Use

Details precautions and considerations during the balance's operational use.

3-3 After Use

Outlines post-operation care and handling procedures for the balance.

3-4 Power Supply

Explains precautions and guidelines related to the balance's power supply.

3-5 Display Symbols and Key Operation

Explains the meaning of display symbols and how to operate the balance keys.

3-6 Smart Range Function

Describes the dual-range weighing functionality of specific models.

4. WEIGHING UNITS

4-1 Units

Lists all available weighing units and modes supported by the GP series.

4-2 Changing the Units

Details the procedure to select and arrange weighing units in the function table.

5. WEIGHING

5-1 Basic Operation (Kilogram Mode)

Provides a step-by-step guide for performing basic weighing in kilogram mode.

5-2 Counting Mode (PCS)

Explains how to use the counting mode to determine the number of objects.

5-3 Percent Mode (%)

Details how to use the percent mode for target weighing or sample variation.

5-4 Animal Weighing Mode (Hold Function)

Explains how to weigh moving objects using the hold function.

5-5 Accumulation Function

Describes how to add and display the total value of multiple weighings.

6. RESPONSE ADJUSTMENT / SELF CHECK FUNCTION

6-1 Automatic Response Adjustment / Self Check Function

Guides on auto response adjustment and self-checking balance performance.

6-2 Manual Response Adjustment

Details the procedure for manual adjustment of response characteristics.

7. CALIBRATION

7-1 Calibration Group

Introduces the different calibration modes available for the balance.

7-2 Automatic Self Calibration (Calibration due to changes in temperature)

Explains the automatic calibration triggered by temperature changes.

7-3 Calibration Using the Internal mass (One-Touch Calibration)

Details the one-touch calibration process using the internal weight.

7-4 Calibration Using an External Weight

Provides instructions for calibrating the balance with an external weight.

7-5 Calibration Test Using an External Weight

Describes how to perform a calibration test with an external weight.

7-6 Correcting the Internal Mass Value

Explains how to correct the internal mass value for accuracy.

8. FUNCTION SWITCH AND INITIALIZATION

8-1 Permit or Inhibit

Explains how to permit or inhibit access to balance parameters for safety.

8-2 Initializing the Balance

Guides on resetting the balance to its factory default settings.

9. FUNCTION TABLE

9-1 Structure and Sequence of the Function Table

Explains the hierarchical structure and navigation of the function table.

9-2 Display and Keys

Describes the display elements and keys used within the function table.

9-3 Details of the Function Table

Provides a detailed breakdown of all parameters available in the function table.

9-4 Description of the Class "Environment, Display"

Explains parameters related to environment settings and display behavior.

9-5 Description of the Item "Data output mode"

Details the various modes for outputting weighing data.

9-6 Description of the Item "Data format"

Describes the different formats for outputting data.

9-7 Description of the Data Format Added to the Weighing Data

Explains additional data fields that can be appended to weighing data.

9-8 Data Format Examples

Illustrates various data output formats with examples.

9-9 Clock and Calendar Function

Guides on setting and using the balance's clock and calendar features.

9-10 Comparator Function

Details how to set up and utilize the comparator function for weighing checks.

9-11 Adding the Comparison Results

Explains how to include comparison results in the data output.

9-12 Main Display Comparison Function

Describes using the main display for showing comparison results.

10. ID NUMBER AND GLP REPORT

10-1 Setting the ID Number

Provides instructions for setting a unique ID number for the balance.

10-2 GLP Report

Explains how to generate and output Good Laboratory Practice (GLP) reports.

11. DATA MEMORY

11-1 Notes on Using Data Memory

Provides important notes and considerations for using the data memory function.

11-2 Memory for Weighing Data

Details how to store and manage weighing data in memory.

11-3 Memory for Calibration and Calibration Test Data

Explains how to store calibration and test data in memory.

11-4 Memory for Unit Mass in the Counting Mode

Describes storing unit mass data for the counting mode.

11-5 Memory for Comparator Settings

Details storing comparator settings (upper/lower limits) in memory.

11-6 Memory for Tare Value

Explains how to store tare values in memory for quick recall.

11-7 Data Memory: Quick Selection Mode

Describes the quick selection mode for recalling stored data.

11-8 Data Memory: Confirmation and Storage Mode

Explains how to confirm and change stored memory data.

12. PROGRAMMABLE-UNIT

Operation

Guides on setting and using the programmable unit conversion function.

13. DENSITY MEASUREMENT

Prior to measurement: Changing the function table

Explains how to configure the function table to enable density measurement.

Measuring the density

Details the step-by-step process for measuring the density of a liquid or solid.

14. I/O UNIT SPECIFICATIONS (Standard)

14-1 RS-232C//External Contact Input

Provides detailed specifications for the RS-232C serial interface and external contact inputs.

15. CONNECTION TO PERIPHERAL EQUIPMENT

15-1 Connection to the AD-8121B Printer

Guides on connecting the balance to an AD-8121B printer and necessary settings.

15-2 Connection to a Computer

Explains how to establish a connection between the balance and a personal computer.

15-3 Using Windows Communication Tools (WinCT)

Details how to use the WinCT software for PC communication with the balance.

15-4 Using the WinCT software, the balance can do the following:

Lists the various functions and capabilities when using WinCT software.

16. COMMANDS

16-1 Command List

Lists all available commands for controlling and querying the balance.

16-2 Acknowledge Code and Error Codes

Explains acknowledge codes and how to interpret error codes.

16-3 Control Using CTS and RTS

Describes how CTS and RTS signals are used for communication control.

16-4 Settings Related to RS-232C

Covers essential settings for the RS-232C serial interface.

18. TROUBLESHOOTING

18-1 Checking the Balance Performance and Environment

Guides on diagnosing performance issues by checking the balance and environment.

18-2 Error Codes

Lists and explains common error codes displayed by the balance.

18-3 Asking For Repair

Provides guidance on contacting service for repairs when issues persist.