Need help?Do you have a question about the A&D GP-61K and is the answer not in the manual?
General| Capacity | 61 kg |
|---|---|
| Division | 0.1 g |
| Readability | 0.1 g |
| Repeatability (σ) | 0.1 g |
| Linearity | ±0.2 g |
| Stabilization Time (Approx.) | 1.5 seconds |
| Operating Temperature | 5°C to 40°C |
| Auto Power Off | Yes |
| Interface | RS-232C |
| Power Supply | AC adapter |
| Display | LCD |
| Pan Size | 386 x 346 mm |
| Units | g, kg, oz, lb |
Explains the manual's five parts and their content.
Lists key features like display, IP65 rating, and calibration capabilities.
Details compliance with FCC Rules and EMC Directives for regulatory adherence.
Provides instructions for carefully unpacking the balance and checking contents.
Details steps for installing the balance, including leveling and power connection.
Advises on environmental installation, power, and initial setup for accurate weighing.
Covers precautions during operation, such as static electricity and handling magnetic materials.
Explains balance symbols, key functions, and operations for accurate measurement.
Lists available weighing units and modes, including conversion factors and display formats.
Details how to select and arrange units/modes in the function table for display sequence.
Explains the fundamental steps for performing basic weighing in kilogram mode.
Guides on using the counting mode to determine object quantity based on unit mass.
Describes the percent mode for target weighing and checking sample variability.
Explains automatic adjustment for environment influence and balance self-checking.
Describes how to manually adjust the balance's response rate.
Outlines the different calibration modes available for ensuring weighing accuracy.
Details the process of calibrating the balance using its built-in weight.
Guides on calibrating the balance using an external calibration weight.
Explains how to protect parameters from unintentional changes using switches.
Details the process for returning balance settings to factory defaults.
Explains the two-layer structure (Class and Item) of the function table.
Details the display symbols and keys used for navigating the function table.
Provides a detailed list and description of all function table items and parameters.
Explains how to set up and use the comparator for weighing tolerance checks.
Guides on setting a unique ID number for balance identification in GLP reports.
Explains how to generate and output GLP reports for calibration and testing.
Provides essential notes and cautions for using the data memory function effectively.
Details how to store weighing data, including capacity and modes.
Details RS-232C and external contact input pin assignments and specifications.
Guides on setting parameters for connecting and using the AD-8121B printer.
Explains how to connect the balance to a personal computer via RS-232C.
Details using WinCT software for data transfer and balance control.
Lists commands for querying data and controlling the balance via RS-232C.
Explains acknowledge codes and error codes for communication errors.
Guides on checking balance performance, repeatability, and environmental factors.
Lists and explains various error codes displayed by the balance.
Provides instructions on when and how to contact for service or repair.
To Next Page
