A&D GP-32K - Page 8

98 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

6

Table of Contents

Default Chapter3
- Table of Contents3
Basic Operation5
- Features5
- Compliance7
1 Introduction5
- About this Manual5
2 Unpacking the Balance9
- Unpacking9
- Installing the Balance10
3 Precautions11
- Before Use11
- During Use11
- After Use12
- Power Supply12
- Display Symbols and Key Operation13
- Smart Range Function14
4 Weighing Units15
- Units15
- Changing the Units18
5 Weighing19
- Basic Operation (Kilogram Mode)19
- Counting Mode (PCS)20
- Counting Operation21
- Percent Mode (%)22
- Animal Weighing Mode (Hold Function)22
- Accumulation Function23
6 Response Adjustment / Self Check Function25
- Automatic Response Adjustment / Self Check Function25
- Manual Response Adjustment26
7 Calibration27
- Calibration Group27
- Automatic Self Calibration (Calibration Due to Changes in Temperature)28
- Calibration Using the Internal Mass (One-Touch Calibration)29
- Calibration Using an External Weight30
- Calibration Test Using an External Weight32
- Correcting the Internal Mass Value34
8 Function Switch and Initialization36
- Permit or Inhibit36
- Initializing the Balance37
9 Function Table38
- Structure and Sequence of the Function Table38
- Display and Keys38
- Details of the Function Table39
- Description of the Class "Environment, Display42
- Description of the Item "Data Output Mode44
- Description of the Item "Data Format45
- Description of the Data Format Added to the Weighing Data47
- Data Format Examples48
- Clock and Calendar Function50
- Comparator Function52
- Setting Example53
- Adding the Comparison Results54
- Main Display Comparison Function54
10 ID Number and Glp Report56
- Setting the ID Number56
- GLP Report57
11 Data Memory60
- Notes on Using Data Memory60
- Memory for Weighing Data61
- Memory for Calibration and Calibration Test Data64
- Memory for Unit Mass in the Counting Mode65
- Memory for Comparator Settings67
- Memory for Tare Value69
- Data Memory: Quick Selection Mode73
- Data Memory: Confirmation and Storage Mode74
12 Programmable-Unit75
13 Density Measurement76
14 I/O UNIT SPECIFICATIONS (Standard)79
- RS-232C//External Contact Input79
15 Connection to Peripheral Equipment81
- Connection to the AD-8121B Printer81
- Connection to a Computer81
- Using Windows Communication Tools (Winct)82
- Using the Winct Software, the Balance Can Do the Following82
16 Commands83
- Command List83
- Acknowledge Code and Error Codes84
- Control Using CTS and RTS84
- Settings Related to RS-232C84
17 Maintenance85
18 Troubleshooting85
- Checking the Balance Performance and Environment85
- Error Codes86
- Asking for Repair88
19 Specifications89
20 External Dimensions91
21 Options93
22 Terms/Index94

Related product manuals

Preview: A&D GP-61KS

Preview: A&D GX-300

Preview: A&D GF-1200