A&D GP-40K - Page 41

98 pages

Save Page as PDF

To Next Page

To Previous Page

Caution

The balance may not transmit the data completely at the specified refresh rate, depending on

the baud rate or data added to the weighing data such as time, date and ID number.

Main Page

Default Chapter3
- Table of Contents3
Basic Operation5
- Features5
- Compliance7
1 Introduction5
- About this Manual5
2 Unpacking the Balance9
- Unpacking9
- Installing the Balance10
3 Precautions11
- Before Use11
- During Use11
- After Use12
- Power Supply12
- Display Symbols and Key Operation13
- Smart Range Function14
4 Weighing Units15
- Units15
- Changing the Units18
5 Weighing19
- Basic Operation (Kilogram Mode)19
- Counting Mode (PCS)20
- Counting Operation21
- Percent Mode (%)22
- Animal Weighing Mode (Hold Function)22
- Accumulation Function23
6 Response Adjustment / Self Check Function25
- Automatic Response Adjustment / Self Check Function25
- Manual Response Adjustment26
7 Calibration27
- Calibration Group27
- Automatic Self Calibration (Calibration Due to Changes in Temperature)28
- Calibration Using the Internal Mass (One-Touch Calibration)29
- Calibration Using an External Weight30
- Calibration Test Using an External Weight32
- Correcting the Internal Mass Value34
8 Function Switch and Initialization36
- Permit or Inhibit36
- Initializing the Balance37
9 Function Table38
- Structure and Sequence of the Function Table38
- Display and Keys38
- Details of the Function Table39
- Description of the Class "Environment, Display42
- Description of the Item "Data Output Mode44
- Description of the Item "Data Format45
- Description of the Data Format Added to the Weighing Data47
- Data Format Examples48
- Clock and Calendar Function50
- Comparator Function52
- Setting Example53
- Adding the Comparison Results54
- Main Display Comparison Function54
10 ID Number and Glp Report56
- Setting the ID Number56
- GLP Report57
11 Data Memory60
- Notes on Using Data Memory60
- Memory for Weighing Data61
- Memory for Calibration and Calibration Test Data64
- Memory for Unit Mass in the Counting Mode65
- Memory for Comparator Settings67
- Memory for Tare Value69
- Data Memory: Quick Selection Mode73
- Data Memory: Confirmation and Storage Mode74
12 Programmable-Unit75
13 Density Measurement76
14 I/O UNIT SPECIFICATIONS (Standard)79
- RS-232C//External Contact Input79
15 Connection to Peripheral Equipment81
- Connection to the AD-8121B Printer81
- Connection to a Computer81
- Using Windows Communication Tools (Winct)82
- Using the Winct Software, the Balance Can Do the Following82
16 Commands83
- Command List83
- Acknowledge Code and Error Codes84
- Control Using CTS and RTS84
- Settings Related to RS-232C84
17 Maintenance85
18 Troubleshooting85
- Checking the Balance Performance and Environment85
- Error Codes86
- Asking for Repair88
19 Specifications89
20 External Dimensions91
21 Options93
22 Terms/Index94

A&D GP-40K - Page 41

Table of Contents

Related product manuals