19
To adjust the clock.
To set the monitor function of A-BPM.
Step
1.
If the indication of the display is hidden, press the
START/STOP or EVENT switch to return to the display of
waiting mode.
Step
2.
If the mark is shown, press and hold the EVENT switch for
3 seconds or more to suspend A-BPM.
Step
3.
While pressing and holding the START/STOP switch,
press and hold the EVENT switch for 6 seconds or more.
Display is displayed on the OLED display.
Step
4.
Operation switches are as follows:
Refer to "
8.2.2. The Clock and the Monitor Function of Measurement
"
EVENT switch
.................
Change the current parameter.
START/STOP switch
......
Decision, next item, end of settings.
To Next Page
Loading...
