A&D TM-2440 - Other Operations

20
5.3.2. Other Operations
To return from waiting mode and show the monitor.
If the indication of the OLED display is hidden, press the
START/STOP or EVENT switch to return to the display of
waiting mode.
Deleting measurement data
Step 1. If the indication of the display is hidden, press the
START/STOP or EVENT switch to return to the display of
waiting mode.
Step 2. If the mark is shown, press and hold the EVENT switch for
3 seconds or more to suspend A-BPM.
Step 3. While holding the START/STOP switch and hold the EVENT
switch for 9 seconds or more. DataClear is displayed on the
OLED display.
Step 4. Press and hold the START/STOP switch for 3 seconds. Data is
deleted and the recorder returns to waiting mode.