Need help?Do you have a question about the A&D TM-2655P and is the answer not in the manual?
General| Brand | A&D |
|---|---|
| Model | TM-2655P |
| Category | Blood Pressure Monitor |
| Language | English |
Important information regarding potential injury and/or property damage if instructions are not followed.
Important information regarding potential minor injury and/or property damage if instructions are not followed.
Important information that helps users operate the device.
Device conformity to European directives and standards for medical products.
Device conformity to Australian EMC standards, evidenced by C-Tick.
Specifies suitable environments for device operation, excluding automatic cycling measurement.
Ensure proper grounding via an electrical outlet to avoid electrical shock.
Use only the specified fuse type and rating to prevent fire hazards.
Internal service or adjustments must be performed by qualified personnel only.
Procedures for stopping use and seeking service if the device malfunctions.
Only trained medical professionals can interpret blood pressure measurements.
Steps to take if the device gets wet due to a liquid spill.
Press the EMERGENCY STOP switch to release air in the cuff during emergencies.
Press START/STOP switch to quickly exhaust air and loosen the cuff.
Periodic checks and professional inspection are recommended for continued operation.
Avoid moisture, extreme temperatures, direct sunlight, and ensure a stable location.
Ensure safe operation, check cables and connections for interference.
Monitor patient, stop immediately if problems arise, avoid MRI and defibrillators.
Return switches, disconnect cables properly, keep clean.
Proper disposal of the device and battery according to applicable regulations.
Overview of TM-2655/TM-2655P features like compact design, automatic cuff system, printer, clock, counter, safety system.
Instructions for unpacking and verifying all items are contained.
Detailed performance, environment, and physical specifications of the device.
Identifies components of the main unit, including displays, buttons, and arm insertion section.
Details the switches, connectors, and fuses located on the rear panel.
Explains the meaning and function of various symbols used on the device.
Describes how to enter and navigate the clock adjustment mode.
Provides a step-by-step example for setting the clock to a specific time and date.
Explains how to enter and use the function setting mode for device customization.
Details specifications and pin assignment for Channel 1 communication.
Step-by-step guide for replacing the arm cuff cover.
Information on electromagnetic emissions and guidance for the device's use environment.
To Next Page
