Need help?Do you have a question about the A&D TM-2657P and is the answer not in the manual?
General| Device Type | Blood Pressure Monitor |
|---|---|
| Form Factor | Upper Arm |
| Measurement Method | Oscillometric |
| Display | LCD |
| Accuracy (Pressure) | ±3 mmHg |
| Inflation | Automatic |
| Deflation | Automatic |
| Measurement Range (Pressure) | 0 to 299 mmHg |
| Pulse Rate Range | 40 to 180 beats/min |
| Measurement Range (Pulse Rate) | 40 to 180 bpm |
| Accuracy (Pulse) | ±5% |
| Power Supply | 4 AA batteries |
| Printing | Yes |
| Cuff Size | 22 to 42 cm |
Describes hazard symbols for safety.
Explains various safety symbols used in the manual.
Covers installation and storage conditions.
Covers pre-use checks and safety.
Safety precautions during operation.
Post-operation procedures.
Actions for suspected problems.
Guidelines for maintenance checks.
Warning about EM interference.
Disposal and environmental impact.
General safety warnings during measurement.
Conditions where measurement is not possible.
Additional important notes for measurement.
Cautions for handling and checking items.
Important notes for users.
Details on different models.
Technical performance details.
Physical size and measurements.
How the device functions.
Standards the device adheres to.
How to set up the monitor.
Connecting the power cable.
Using the security feature.
How to attach the panel.
Daily checks before operation.
How to load paper.
Options for print output.
How to access and change settings.
Adjusting result display duration.
Setting inflation pressure.
Setting IHB detection.
Setting print darkness and speed.
Configuring ID/name output.
Enabling MAP printing.
Selecting output format.
Enabling graph output.
Enabling bitmap output.
Enabling operational sounds.
Configuring data connection.
Setting data transfer speed.
Setting stop bits for communication.
Configuring data output format.
Setting date output format.
Setting time output format.
Configuring ICT printing types.
Setting Bluetooth connection timing.
Details on available units.
Specifications for Mini-DIN.
Specifications for D-Sub.
Bluetooth operation precautions.
Steps to pair devices.
How data is sent.
Configuring Bluetooth settings.
Technical details of Bluetooth.
Regular checks and safety.
Procedure for pressure verification.
How to clean the device.
How to clean the print head.
Cleaning the paper path.
Items for regular checks.
Procedure to replace the cuff.
Viewing measurement history.
How to dispose of parts.
Troubleshooting checklist.
List of error codes.
Factors affecting blood pressure.
Explanation of hypertension.
Specifications for bitmap images.
Procedure for bitmap transfer.
Electromagnetic emission standards.
Immunity to external fields.
Immunity to power line disturbances.
Immunity for signal interfaces.
To Next Page
