21
Problems and possible solutions
Hearing inrument emits whiling sounds.
- Reinsert the ear piece until it ts securely.
- Check whether tube, adapter and ear piece
are connected correctly.
- Decrease the volume.
- Clean or exchange the ear piece.
Sound is diorted.
- Decrease the volume.
- Replace the empty battery.
- Clean or exchange the ear piece.
Hearing inrument emits signal tones.
- Replace the empty battery.
Hearing inrument does not work.
- Turn the hearing inrument on.
- Gently close battery compartment completely.
- Replace the empty battery.
- Make sure the battery is inserted correctly.
- Power-on delay is active. Wait several seconds
and check again.
Consult your Hearing Care Professional if you encounter
further problems.