AARCOMM PNUT User Manual

2
2.
Precaution for Welding
Provided that the ground clamp is affixed to the machine close to the point of the
weldment to be placed, electro-welding may be performed with the Trident Remote
Control System installed. However, as a precaution against electrical damage, please
disconnect the 30-way and antenna connectors from the C220 Controller and secure them
at least 10 cm away from the C220 prior to any welding operation on the machine.

AARCOMM PNUT Specifications

General

Brand	AARCOMM
Model	PNUT
Category	Controller
Language	English