This parameter can be adjusted from 0 to 9 seconds to select 10 levels of
brightness; it has an initial value of 4. Higher brightness levels consume more battery
power and yield less run-time per charge.
This parameter is local to the Handheld on which it is configured.
No access code is required to change this parameter.
Light
Handhelds equipped with lighted displays will show this parameter.
This parameter determines how long the display lights will stay on for, as follows,
after a button is pressed; it has an initial value of 10.
The displays are non-illuminated. This value is selected by pressing
the "-" button once more after decreasing the value to 1 second. The
battery run-time is maximized with this value.
The display light will illuminate for this many seconds after a button
is pressed.
The displays are always illuminated. This value is selected by
pressing the "+" button once more after increasing the value to 60
seconds. This setting uses the most battery power.
This parameter is local to the Handheld on which it is configured.
No access code is required to change this parameter.
mm Systems Inc. in a separate communication).
To Next Page
Loading...
Need help?
General