Configuring the application card
15
Applications Card CPU2
syd-0421/1.2 – R2.1 – 07.2012
Configuring applications
Configure the mandatory applications. The hyperlinks at the bottom of the
Configuration screen take you to the OIP and TWP configuration platforms. Log on
using the username cpu2-emmc and the application card password.
Saving the configuration (menu Maintenance)
You can create a configuration data backup under Maintenance. For this, click
Create backup. Backup data is then respectively created for the OIP and TWP
configuration data then stored in the data system of the application card and listed
on the screen. The file names contain date and time-related information.
You can copy backup data to your data storage device with the Download function.
With the Restore function, restore a specific backup from the application card's file
system and activate the configuration data contained therein.
You can delete a backup file from the application card file system, with the Delete
function.
In Upload backup file you can choose from your data storage device a backup file
which you wish to reload on the application card file system. Click above the
Upload backup file button to take the action.
Installing client applications
To install client applications on user workstations, change to the Client Roll-out
screen and click MailTo on the client application to be installed. An e-mail is
opened with the installation link. Send the e-mail to the user group you want and
ask it to start the installation via the installation link.
To Next Page
Loading...
