Getting started
6
Getting started Aastra 470
syd-0419/1.0 – R1.2 – 10.2011
3. Select your sales channel and click the Initialize button.
A message is shown, telling you that the sales channel will be set and the com-
munication server will be restarted. At the end of the message you will find a hy-
perlink with the IP address of your communication server.
4. Wait until the system is restarted and click the hyperlink. This takes about two
minutes.
The WebAdmin welcome view is opened and you are asked to change the de-
fault password.
5. Enter the default password and the new password. Confirm the new password
and click the Change button.
The WebAdmin home view is opened.
To Next Page
Loading...
