Aastra 6710a - Message Waiting Memory (MWM); Message Waiting Operations

Message Waiting Memory (MWM)
The message waiting memory normally stores the number to reach the voicemail box.
Save MWM
1. Place the handset on the phone
2. Press [ ]
3. Press [ ] and enter the number to be saved
4. Press [ ] key again to complete saving
5. The “save” successes with confirmation tone
Dial from a MWM
1. Pick up the handset or press ‘Speaker/Handset’
2. Press the [ ]
Delete MWM
1. Place the handset on the phone
2. Press [ ]
3. Press [
]
4. The “delete” successes with confirmation tone
Message Waiting LED
When there’s message awaiting to be read, the message waiting LED will be lighted ON or
flashing in red.
The Message Waiting switch (at the back of the phone) is used to select the appropriate MW
mode (HV / + / - ). Please check the MW type of the connected PBX to work with the phone.
Select “OFF” on the MW switch to deactivate the message waiting function.
11