Aastra 6710a - Phone Setting; Configuring Flash Time and Ring Melody

Phone Setting
Different combination of key sequences are used on different parameter settings as shown in the
table below
Parameters Programming key
sequence
Lock
Protected
Valid
Settings
Default
Set flash time [save]+[#]+[0]+[1]
+[#]+[X]+[#]
Yes 1: 100ms
2: 200ms
3: 300ms
4: 400ms
6: 600ms
9: 900ms
300ms
Set ring melody [save]+[#]+[0]+[2]
+[#]+[X]+[#]
Yes 1 ~ 8 RING 1
Set Flash time
1. During On-hook, press [save]+[#]+[0]+[1]+[#]+[X]+[#]
X could be set from 1 (100ms) / 2 (200ms) / 3 (300ms) / 4 (400ms) / 6 (600ms) / 9 (900ms).
2. If the setting successes, a confirmation ring will be generated.
Set Ring Melody
1. During On-hook, press [save]+[#]+[0]+[2]+[#]+[X]+[#].
X could be set from 1 to 8 (melodies 1~8).
2. If the setting successes, the new ring melody is played.
12