Integrated Access Controller – Installaon manual
All rights reserved. © AAT HOLDING S.A.
2
1. Introduction
KZC-800-U/H/M KZC-900-U/H
Integrated access controllers/readers
The KZC-800-U/H/M i KZC-900-U/H access control units realize the card reading
and keypad operation functions, lock, alarm, ring bell, exit button and the mag-
netic contact switch on the door. Those units can be use as standalone controller
or standard Wiegand reader.
These models supports 13.56MHz IC Mifare cards (KZC-800-M) or 125KHz EM,
HID Prox cards (KZC-800-U/H i KZC-900-U/H ). It controls 1 door, supports up
to 2000 users in total, each user have one card and one PIN (PIN - 1234 as de-
fault, should be change for normal using).
The access control unit supports 1 master code, one manager add card, one
manager delete card, 1 anti-duress card and 1 anti-duress PIN, providing users
with easy operation and safe guarantee.
Main Features
Aluminum alloy case, waterproof, fully potted, confirms to IP65
Touch panel
Built-in 125KHz (EM, HID card) and 13.56MHz(IC, CPU card, ISO14443A)
reader ( KZC-800-M only)
Digital backlit key. The back light can be set to Normal ON, Normal OFF or
Auto.
With door bell function, build-in or external door bell optional.
Multi-function, operating as slave reader, single door, anti-pass back func-
tion, etc., suitable for various occasions.
To Next Page
Loading...
