What to do if AAXA Technologies BP1 display 'No Sync, No Signal'?
If your AAXA Technologies Speakers show 'No Sync, No Signal', ensure your computer is set to output a video signal. For some laptops, hold the Function key and press F5. If using the speakers as an external monitor on Windows, select 'extend my desktop to this monitor'. You may also need to adjust the resolution in your video driver settings.
How to fix blurred image on AAXA Technologies Speakers?
If the image from your AAXA Technologies Speakers is blurred: * Adjust the focus using the focus adjustment dial on the back of the BP1 until the image becomes clear. * Ensure the projector is on an even plane with the screen.
Instructions for powering on the BP1 projector and its various modes.
Steps to activate and prepare the BP1 for Bluetooth speaker functionality.
Step-by-step instructions for pairing the BP1 with a Bluetooth-enabled device.
Instructions for opening and playing video files using the BP1's video player.
Instructions for opening and viewing photo files using the BP1's photo menu.
How to connect the BP1 to multimedia devices using a Digital AV cable.
Specific instructions for connecting a computer to the BP1 via Digital AV.
How to connect devices using a USBC cable for mirroring via the display port.
Solutions for issues related to blurred or offset projected images.
Steps to resolve issues with no video signal or synchronization problems.
Addresses problems like the projector not turning on or no picture/unsupported files.
General| Speaker Type | Portable Bluetooth Speaker |
|---|---|
| Connectivity | Bluetooth, AUX |
| Battery Life | 6 hours |
| Power Output | 3W |
| Playback Time | 6 hours |
| Bluetooth Version | Bluetooth 4.0 |
| Bluetooth Range | 10 meters |
| Input Voltage | 5V |
To Next Page