press OK on a Highlighted channel. If you set OFF, the channel list will
disappear when you press OK on a playing channel.
12. Recall List: You can turn Recall List on or off. If you set ON, when you
press
Recall button of RCU you can get the recall list. If you set OFF, when you press
recall button you can go back to the last program you have selected.
13. Low Power Standby： You can turn Low Power Standby on or off.
14. Standby Time: You can set the Standby Time on or off.
15. PLSN Super Scan: Accessorial function.
16. Front Panel Light: Set the brightness of the LED.
17. Front Panel Display: Set the LED display channel or clock.
18. Channel List Type: Here you can set the channel list type wide or simple.
19. Channel name auto update: If you set ON, you can’t rename the channel
name, the channel name automatic to update.
5.2 OSD Setup
Menu-> Settings ->OSD Setup
1. Menu Transparency: Set the transparency of all menus.
2. TXT Transparency: Set the transparency of teletext.
3. Display Mode: Set the HD format between 1080p, 1080i, 720p, 576i
To Next Page
Loading...
