2S-10S.
ØØ Photo View Mode
Set the Photo View Mode state
on Full Screen, 2x2
Thumbnail or 2x3
Thumbnail.
2. PVR Setting
ØØ Record Partition
Select the Partition where
save your record or other
result of your operation.
ØØ Record Mode
Set the Record Mode Channel or Transponder.
ØØ Record Type
Set the Record Type TS or PS.
ØØ Record Time
Set the Record Default Time off, 30, 60, 90, 120 minute or input number
directly.
ØØ Auto Timeshift
Set start the Timeshift if automaticly.
ØØ Timeshift Buffer Size(MB)
Set the Timeshift Buffer Size off, 100, 200, 400, 800, 1600, 3200, 6400MB.
ØØ Timeshift Need Save
Set the Timeshift if need to save in USB device.
ØØ Timeshift To Record
It allows you to whether add the content of auto timeshifted into recorded file or
not.
ØØ Play Start Pos
When playing the PVR file, set the Play Start Pos whether head of the file or last
pos (Stop play by manual last time) of the file.
To Next Page
Loading...
