Digital Audio output.
2. LAN
Connect to the internet using an Ethernet cable.
3. USB2.0
One USB 2.0 Host Port.
6. IR-EX
Connect the Front Panel, to receive the signal from remote control.
2.2 Remote Control Unit (RCU)
You can control this receiver by this remote controller with full function.
1. STANDBY: Switch between operation and standby modes.
2. F1: Accessorial function.
3. SHIFT: Enable/Disable timeshift.
4. MUTE: Mute audio.
5. I I : Pause/Time shift.
6. ◄◄: Fast rewind.
7. ►►: Fast forward.
8. ●: Record.
9. ►: Play.
10. ■：Stop recording and playing.
11. MENU: Activate main menu.
12. EXIT: Exit current menu step by step.
13. ▲/ ▼ /◄/► :Navigates through the Menus
14. OK: Confirm
15. RELOAD: Move to the previous viewed channel.
16. EPG (Electronic Program Guide): Display
the program guide.
17. V+/V- : Change volume in viewing mode.
18. CH+/CH-: Change program.
19. INFO: Display the program information.
To Next Page
Loading...