25FPS(default).
QHD P30+FHD P30: Front 2K 30FPS + Inside 1080P
30FPS.
FHD P30+FHD P30: Front 1080P 30FPS + Inside 1080P
30FPS.
Loop Recording: Continuously record small video files of a
length which is determined by the settings 1/3 Minutes.
For example, if it is set for 3 minutes, the camera will
automatically save a section of videos every 3 minutes.
When the memory gets full, the dash cam will automatically
delete the oldest video to record the latest video, which can
avoid a lack of memory.
WDR:The WDR setting increases the dynamic range of the
camera.select to optimize video quality with wider light range
and image details.
G-Sensor(Gravity Sensing)
The G-Sensor defines the required force needed to trigger
emergency recording.Once Emergency recording is
triggered the current recording will be saved and protected
from being saved over by the normal loop recording.To set
the required sensitivity please follow the instructions below.
1.Press the【OK 】Button to stop the dash cam from
recording.(no red dot flashing on the screen)
2.Press the
【
MENU
】
Button to enter the Video Menu.
3.Press the【MENU】Button again to enter the Settings
Menu.
4.Press the [◀ ] or [▶ ] button to select the Gravity Sensing
setting option,select 【OK】to confirm .
To Next Page
Loading...
