Abaxis V9000T - Connecting the Power Cord

V9000T Trinocular Microscope
8
ASSEMBLY (continued)
Connecting the Power Cord
IMPORTANT: Use care when storing the
power cord so that it does not bend or twist.
Make sure the power switch is at “0”(OFF)
before connecting.
Insert the connector ① of power cord securely
into the power socket ②, (see Fig. 3).
securely into an Insert the other connector
electrical outlet.
The microscope uses a universal power
supply so it may be used in any voltage
range between 90 ~ 240v when used with the
appropriate line cord.
An optional cord hanger can be installed on
your microscope for simple and easy
storage. (see Photos 1 & 2)
Fig. 3
①
②
Photo 1
Optional
Cord Hanger
Photo 2
Optional
Cord Hanger
Shown
With Cord