ABB 07KT51 - User Manual

Operating Manual Advant Controller 31
Series 40 and 50
Order No.
1SAC 1316 34 R0201
ABB Schalt-
und Steuerungstechnik

Summary

Regulations

Installation Regulations and Standards

1 Introduction

AC31 System Overview and Applications

Overview of the AC31 system, its applications, and communication interfaces.

AC31 System Setup Rules

Defines the basic units and general rules for AC31 system setup.

Operation of AC31 40;50 Series Basic Units

3 Technical Specifications

AC31 General Operating Conditions

AC31 Basic Unit Specifications

Provides views and technical specifications for AC31 basic units.

Centrally Extensible Remote Unit Specifications

Digital Central Extension Specifications

Analog Central Extension Specifications

4 Installation

AC31 System Implementation

Covers assembly conditions, input/output cabling, and earthing rules.

Basic Unit and Remote Unit Cabling

Cabling Digital Central Extensions

Cabling the Analog Central Extension

Addressing

Explains addressing for input/output variables and units.

5 Programming

Introduction to the Software

Introduces the 907 PC 331 programming software and its languages.

List of Variables

Initialization of the Basic Units

Configuration

Details configuration tools like system constants and operating modes.

Configuration with the CS31 CO Function Block

6 Communication

Communication Between Basic Units on the CS31 System Bus

Details communication between master and slave units on the CS31 bus.

Network Communication via the Integrated MODBUS Interface

Details MODBUS® interface for network communication.

Point-to-Point Communication with the Integrated ASCII Interface

7 Diagnosis

Types of Errors Detected

Categorizes errors into Fatal, Serious, Light, and Warnings.

Detection of Errors

Error Management via Programming

Meaning of the Contents of the Error Word Flags

ABB 07KT51 Specifications