ENG
45
Screen-
saver
During the configuration of the device, the
use of pictures as screensavers can be
activated (6136/100Cxxx).
In this case, pictures can be transferred to
the control panels using an SD/MMC card.
Fig. 70
1. Insert the SD card into the control panel
and press the "Screensaver" button (Fig.
70).
2. Select the file from the list and press the
“OK” button.
3. Press the "EIB Programming Mode" button
and enable it.
Pictures cannot be transferred through the
bus.
Macro
recorder
You can use the macro recorder to record
switching process in order to repeat them just
like scenes as often as desired.
You can record and save up to 32 macros
with 20 switching processes each.
Fig. 71
To Next Page
Loading...
