ABB A150-M66 - Fig. 59: Nozzle Ring Compression PD; Nozzle Ring Compression PD; Table 44: Nozzle Ring Compression PD

Operation Manual / 4 Product description / A150-M56/66/57/67 -
A155-M..
9 Dismantling and fitting with removed air inlet and gas outlet / 9.10
Nozzle ring compression PD
© Copyright 2020 ABB. All rights reserved. HZTL4032_EN Rev.P March 2020
9.10 Nozzle ring compression PD
For the nozzle ring (56001) to be fixed during operation, it must be clamped between the
heat shield(42400) and the turbine casing(51000).
Fig.59: Nozzle ring compression PD
42001 Bearing casing 51000 Turbine casing
42400 Heat shield 56001 Nozzle ring
Product Nozzle ring compression PD [mm]
A150-M -0.17 ... 0.17
A155-M -0.17 ... 0.17
Table44: Nozzle ring compression PD
1. Measure values A, B, and S on cleaned surfaces.
2. Calculate compression (PD).
u If the calculated value (PD) lies outside the specified range, contact an ABB Turbochar-
ging Service Station.
Page 95 / 171