ABB Ability - Ethernet Ports and Specifications

ABB ABILITY
TM
EDGE INDUSTRIAL GATEWAY
41
6
—
6.4 Ethernet ports
The ABB Ability™ Edge Industrial Gateway provides 2x 10/100 Mbps Ethernet ports:
• ETH 0.
• ETH 1 (Local LAN).
The Ethernet connectors are available on the rear side.
6.4.1 Ethernet specifications
6.4.2 ETH 0/1 connectors specifications
Connector layout:
Connector pinout (pins not listed are not connected):
Connector specifications:

• Gender: Female.
Mating connector specifications:

• Gender: Male.
Connector LEDs layout:
LEDs meaning:
Ref # LED color LED meaning
A
Yellow Activity
B Green Link
Feature Description
Network Standard


Speeds 
Notes 
Pin # Signal Type Description
  O Transmit Data +
  O Transmit Data -
  I Receive Data +
  I Receive Data -
A B