Need help?Do you have a question about the ABB Ability 800xA Series and is the answer not in the manual?
General| System Type | Distributed Control System (DCS) |
|---|---|
| Architecture | Client-server |
| Redundancy | Supports redundant controllers, communication networks, and I/O modules |
| Operating System | Microsoft Windows Server |
| Communication Protocols | OPC, Modbus, IEC 61850, PROFIBUS, Foundation Fieldbus |
| Integration | Supports integration with third-party systems and ABB products |
| Scalability | Highly scalable, from small to large installations |
| Cybersecurity | Built-in cybersecurity features including access control and network security |
| User Interface | Graphical user interface |
| Application Support | Supports a wide range of industrial applications including process control and safety |
Covers equipment environment, electrical shock, hazardous locations, surface temperature, maintenance, and password security.
Details specific precautions related to redundancy, firmware updates, and module compatibility.
Explains the functions and capabilities of the LD 810HSE Ex as a gateway between HSE and H1.
Covers general requirements, North American, and European/International approvals for hazardous areas.
Configuration of IP address, subnet mask, and gateway for network communication.
Details on configuring and commissioning the device using Fieldbus Builder FOUNDATION™ Fieldbus.
Explains the redundancy concept, fault domain, and redundancy behavior of the linking devices.
General requirements for installing the LD 810HSE Ex in a Zone 2 hazardous area.
Details on commissioning, installation, and usage in hazardous areas, including enclosures and environmental factors.
To Next Page
