ABB Ability 800xA Series - Plant Configuration and Commissioning

Figure 3.14: Upload Certificates Page
As certificates are usually used within the WWW, you need either a fully qualified domain
name or a public IP address to register.
Secure communication is only possible via HTTPS. FF-HSE does not support secure
communication.
3.3 Plant Configuration and Commissioning
In general, the Linking Device will be used in a plant with H1 devices and HSE devices,
all of which must be configured before commissioning. With 800xA - Device Management
FOUNDATION™ Fieldbus, ABB provides the Fieldbus Builder FOUNDATION™ Fieldbus,
a tool for the configuration and commissioning of FOUNDATION™ Fieldbus subsystems
in the Industrial IT 800xA Plant Explorer. Later, there will be a release enabling
configuration and commissioning using Control Builder F for the AC 800F controller.
The Linking Device is available for immediate use with Fieldbus Builder FOUNDATION™
Fieldbus in the Industrial IT 800xA environment.
2PAA114135-610 71
3 Configuration
3.3 Plant Configuration and Commissioning