Need help?Do you have a question about the ABB rec670 and is the answer not in the manual?
General| Product ID | REC670 |
|---|---|
| Communication Protocols | IEC 61850, IEC 60870-5-103, DNP3, Modbus |
| Mounting | Panel or rack mounting |
| Functions | Protection, control, communication |
| Application | Substation Automation, Power System Protection |
| Voltage Supply | 100-240 V AC/DC |
| Inputs | Binary and analog inputs |
| Outputs | Binary and analog outputs |
| Display | LCD display |
| Operating Temperature | -40 to +70 °C |
| Protection Functions | Overcurrent, earth fault, distance protection |
| Rated voltage | 100-240 V AC/DC |
Lists critical warnings for handling the IED.
Describes how to perform local control of apparatuses via the HMI.
Covers general settings that may cause IED restart.
Covers communication parameter settings.
Settings for analog inputs and I/O modules.
Parameters for apparatus control.
Parameters for setting various monitoring functions.
Overview of default setting groups.
Settings for various current protection functions.
Settings for voltage protection functions.
Settings for frequency protection functions.
How to individually release protections for testing.
Viewable data for current protection functions.
Trip related data for voltage protection.
Measurements from frequency protection functions.
Viewable data for scheme communication.
Output data from control functions.
To Next Page
