ABB rec670 - Broken Conductor Check BRCPTOC; Directional Over-Power Protection GOPPDOP; Directional Under-Power Protection GUPPDUP; Four Step Phase Overcurrent Protection OC4 PTOC

11.6.3.2 Broken conductor check BRCPTOC
Main
menu/Test/Function status/Current protection/BrokenConductor(PTOC,
46)/BRC
Displays the output data of BRCPTOC.
11.6.3.3 Directional over-power protection GOPPDOP
Main menu/Test/Function status/Current protection/
DirOverPowerProt(PDOP,32)/GOP
Displays the output data of GOPPDOP.
11.6.3.4 Directional under-power protection GUPPDUP
Main menu/Test/Function status/Current protection/
DirUnderPowerProtection(PDUP,37)/GUP
Displays the output data of GUPPDUP.
11.6.3.5 Instantaneous phase overcurrent protection PHPIOC
Main menu/Test/Function status/Current protection/
InstPhaseOverCurrent(PIOC,50)/IOC1
Displays available instances of PHPIOC with a number of measurements per
instance showing the trip status in general and per phase.
11.6.3.6 Instantaneous residual overcurrent protection EFPIOC
Main menu/Test/Function status/Current protection/
InstResidualOverCurrent(PIOC,50N)/IEF
Displays available instances of EFPIOC with one trip value per instance.
11.6.3.7 Four step phase overcurrent protection OC4PTOC
Main menu/Test/Function status/Current protection/
PhaseOverCurrent4Step(PTOC,51_67)/TOC
Displays available instances of OC4PTOC with several measurements per instance.
These measurements are primarily trip and start signal indications from each phase
and from the various steps in the protection scheme.
11.6.3.8 Pole discordance protection CCRPLD
Main menu/Test/Function status/Current protection/PoleDiscordance(RPLD,
52PD)/PD
Section 11 1MRK 511 188-UEN C
Test the IED
72
Operator's manual