• Confirm all dialog boxes with OK till you get back to the Local Area Connection
Properties window.
• Click the Close button.
3.2 System Settings
After an IP connection between PC and Linking Device has been set up as described
in subsection Setting Up an IP Connection Between PC and Linking Device on page 54,
you may access the Linking Device from your PC by means of a web browser supporting
JavaScript (e. g. Microsoft Internet Explorer).
3.2.1 Logging in to the Web Server Interface
If you are choosing to access the LD810 HSE Ex web server via a standard HTTP
connection instead of HTTP Secure (HTTPS), the communication will not be encrypted.
In your web browser's URL field, enter the Linking Device's preset IP address
(HTTPS://192.168.0.10) or the current IP address of the Linking Device, respectively.
The Login page opens, see Figure 3.6.
If the web server is not accessible in System 800xA version 6.1, first enable the web
server from the Fieldbus Builder FOUNDATION™ Fieldbus. For more information on
enabling the LD 810HSE Ex web server, refer to System 800xA Device Management
FOUNDATION™ Fieldbus Configuration manual (3BDD012902*).
Figure 3.6: Config Login Page
Enter your user name and password.
2PAA114135-610 59
3 Configuration
3.2 System Settings
To Next Page
Loading...
