ABB Ability 800xA Series - Page 60

Table 3.3 shows the list of default users who can log in to the Linking Device using the
Linking Device web server page.
Table 3.3: Users and Their Roles
RoleDefault PasswordDefault user
Operation uservwitoperat
Configuration user with permission to
load firmware etc.
configconfig
Diagnostics user with access to diagnosis
information
Suppmfpdiag
The following tasks can be executed by the specified role:
Table 3.4: User Tasks
Operation userDiagnostics userConfiguration userTask
nonoyesUpdating the
Firmware
noyesyesConfiguring network
settings
noyesyesChanging passwords
noyesyesUploading
Certificates
yesyesyesViewing the
configuration
The default passwords of the users must be replaced with passwords that conform
with your organization's security policy at the first possible opportunity. Failure to
replace the default password makes the system susceptible to unauthorized access.
Refer to the Password Security topic in System 800xA Administration and Security
(3BSE037410*) for recommendations on establishing a password security scheme.
Figure 3.7 shows the caution message that is displayed when a user is logged in with
default password.
2PAA114135-610 60
3 Configuration
3.2 System Settings