ABB AquaMaster4 - User Manual

—
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION | OI/FET400-EN REV. D
AquaMaster4
Electromagnetic flowmeter transmitter
The ideal flowmeter for potable
water distribution networks,
revenue metering and irrigation
applications
Measurement made easy
Introduction
AquaMaster4 is a high performance electromagnetic
flowmeter for the measurement of electrically-
conductive fluids and is normally supplied as a
factory-configured, calibrated system.
This publication provides end-user details for
AquaMaster4 integral and remote transmitters.
For more information
Further publications for AquaMaster4 are available
for free download from:
http://new.abb.com/products/measurement-
products
—
Harness the power
of electromagnetic
flowmeters

Summary

Health, Safety, and Cybersecurity

Safety Precautions

Essential instructions for safe installation, operation, and maintenance.

Cybersecurity

User responsibility for securing the product's network connection.

Transmitter Overview

Product Identification Labels

Nameplate - FET41 X;43 X

Details of the information found on FET41X/43X model nameplates.

Nameplate - FET45 X

Details of the information found on FET45X model nameplates.

Installation

Installation Conditions - FET 410;430

Installation Conditions - FET 450

Antenna Installation - FET45 X

SIM Card Installation - FET45 X

Grounding

Connections and Power Supply

Remote Sensor and Input;Output Connections

Communication Interfaces

Fitting Configuration Interface

Commissioning

Safety Instructions

Checks Prior to Commissioning

MID;Anti-tamper Seals

Legal requirements for sealing MID-compliant flowmeters.

Cellular Communication Setup

Procedure for establishing 4G and NB-IoT communication.

Operation

Start-up

Operating Display

Factory-Configuration;Calibration

Overview of factory settings and configuration via NFC interface.

Security and Password Access

Details on user accounts, passwords, and access levels.

Data Transmission

Configuration for data reporting via cellular 4G and NB-IoT.

Velox User Interface App

Process Values and Logger Data

Configuration

Diagnostics

Diagnostic Error Messages

Troubleshooting guide for flow measurement and totalizer errors.

Other Errors;Required Action

Legacy Support

Legacy Transmitter Compatibility

Information on compatibility with legacy AquaMaster remote sensors.

Audit Logger

Exporting and Clearing Audit Log

Procedures for exporting and clearing event records via Velox app.

Firmware Upgrade via NFC

Upgrade Firmware

Specification

FEX41 X;43 X Specifications

Technical specifications for FEX41X/43X models.

Mounting, Power Supply, and Battery

Inputs and User Interface

FEX45 X Specifications

Technical specifications for FEX45X models.

Outputs and Data Handling

Environmental Conditions and Options

ABB AquaMaster4 Specifications

General

Category	Electromagnetic Flowmeter
Measurement Principle	Electromagnetic
Accuracy	±0.2% of reading
Protection Rating	IP68
Outputs	Pulse
Power Supply	100 to 240 VAC, 24 VDC
Communication Protocols	HART, Modbus
Operating Temperature	-20°C to +60°C
Material	Stainless steel