To Next Page

To Previous Page

ABB ABILITY

EDGE INDUSTRIAL GATEWAY

—

1.1 Contents

1.1.1 Overview

This manual describes the characteristics of the ABB Ability

Edge Industrial Gateway.

1.1.2 Recipients

In accordance with standard IEC 60050, this manual is aimed at two user profiles:

• Expert persons, in electric environment (IEV 195-04-01): persons with sufficient training and

experience to enable them to perceive the risks and avoid the hazards potentially created by

electricity.

• Persons trained in an electrical environment (IEV 195-04-02): persons suitably informed or

supervised by electrical technicians to enable them to perceive the risks and avoid the hazards

potentially created by electricity.

IMPORTANT

In this manual the tasks are specifically indicated that can be performed by trained

persons in an electrical environment. All the remaining tasks described in the manual must

be performed by trained persons in an electrical environment.

ABB accepts no liability for damage to property or personal injury due to failure to comply

with the instructions contained in this document.

—

1.2 Safety

1.2.1 Safety prescriptions

HARZARD! ELECTRIC SHORK RISK! In the case of persons who are not authorized to work

on pants carrying live voltage in accordance with local legislation, in order to avoid any

potential electrical risk during assembly, installation, maintenance or removal of the

ABB Ability™ Edge Industrial Gateway from service, disconnect or lock out all electrical

supplies.

—

Introduction

ABB Ability User Manual

Other manuals for ABB Ability