13
ABB ABILITY
TM
EDGE INDUSTRIAL GATEWAY
82
—
13.1 CE Marking
This product is CE marked.
The product meets the guidelines listed in the following sections.
ABB is not responsible for the use of this product together with equipment (eg power supplies,
personal computers, etc) that are not CE marked and compliant with the requirements specified in this
document.
This product is compliant with:
• Reduction of Certain Hazardous Substances (RoHS2).
• IP40.
• CE.
• IEC62368-1 Information Technology Equipment - Safety - Part 1: General Requirements.
• Product compliance with part 15 of FCC.
—
13.2 WEEE compliance
2012 on waste electrical and electronic equipment (WEEE), the symbol above, shown on the product or
within its literature, indicates separate collection for this electrical and electronic equipment (EEE) that
has been placed on the market after 2005.
This product, at the end of its life cycle, must be collected separately and managed in accordance with
the provisions of the current Directive on waste electrical and electronic equipment.
Because of the substances present in the product, improper use or disposal of the refuse can cause
damage to human health and the environment.
id any possible legal implications, contact your local waste collection body for full recycling
information.
—
13.3 RoHS 2 compliance
The product described in this document, including all its components and its sub- assemblies, have
been manufactured in compliance with the Directive 2011/65/EU of the European Parliament and of the
electronic equipment.
—
Declaration of conformity
To Next Page
Loading...
