EasyManua.ls Logo

ABB ACS580-01 - Installation with Option +H358 UK Gland Plate; Safety Instructions; Introduction to the Guide; Applicability

ABB ACS580-01
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation with option +H358 UK gland plate 3
Installation with option +H358
UK gland plate
Safety instructions
Obey all safety instructions of the drive. Read the safety instructions before you
install, start up, or use the drive. See the hardware manual.
Introduction to the guide
Applicability
This guide is applicable to the following drives with option +H358 UK gland plate and
degree of protection of IP21:
ACS880-01
ACH580-01, ACQ580-01, ACS580-01.
The guide is a supplement to the hardware manual.
Target audience
This supplement is intended for people who plan the installation, install, start up, use
and service the drive. Read the supplement before you do work on the drive. You are
expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols.
Contents of the guide
This guide contains installation instructions on how to
remove the standard bottom plate and power cable shelf from the drive
install SWA glands over the power and control cables
install SWA glands to the UK gland plate
install the UK gland plate to the drive
connect the power cables to the drive.
For other instructions, see the drive hardware manual.

Other manuals for ABB ACS580-01

Related product manuals