ABB ACS580 Series Quick Start Up Guide

5. In the Device view, select PLC_1 (DP interface). In the General tab, select PROFIBUS
address and click Add new subnet to add the subnet and then assign PROFIBUS address.
Figure 114 DP interface
6. After configuring PROFINET and PROFIBUS interfaces in TIA portal, click Network view to
view the PLC connections.
Figure 115 PROFIBUS and PROFINET configurations
Installing GSD file for S7-1200 PLC
To install GSD file, see section Installing GSD file for S7-300 PLC (page 79).

ABB ACS580 Series Specifications

General

Category	DC Drives
Series	ACS580
Enclosure	IP21, IP55
Rated Power	0.75 to 500 kW
Control Method	Vector Control, Scalar Control
Fieldbus Communication	Modbus RTU, EtherNet/IP, PROFIBUS DP, CANopen