Need help?Do you have a question about the ABB ACS800-01-0100-3 and is the answer not in the manual?
General| Cooling Method | Air-Cooled |
|---|---|
| Enclosure Type/Protection Class | IP21 |
| Power Rating (kW) | 100 kW |
| Output Voltage | 0-480 V |
| Control Method | Direct Torque Control (DTC) |
| Communication Interface | PROFIBUS, DeviceNet, CANopen |
Provides critical safety instructions for installing and maintaining the drive.
Details safety instructions and requirements for proper grounding of the drive.
Covers safety aspects for physical installation and maintenance tasks.
Safety precautions when handling sensitive circuit boards.
Safety instructions for handling and installing fiber optic cables.
Safety guidelines for operating the drive safely.
Specific safety warnings related to permanent magnet motor drives.
Instructions for securely mounting the drive unit onto a wall.
Instructions for selecting compatible motors and checking ratings.
Methods to protect motor insulation and bearings from drive output pulses.
Table detailing motor insulation, filter, and bearing requirements based on motor type.
Guidelines for connecting the main power supply to the drive.
Information on protecting the drive and motor from thermal overload.
Details on the drive's internal ground fault protection function.
Explains the function and installation of the unexpected start-up prevention.
Describes the Safe Torque Off (STO) function and its implementation.
Guidance on selecting appropriate power cables based on regulations and drive specs.
Step-by-step guide for connecting input and output power cables.
Instructions for installing the AGPS board and connecting its power supply.
Instructions for installing the ASTO board and connecting its power supply.
A comprehensive list for verifying mechanical and electrical installation before start-up.
Emphasizes reading safety instructions before performing any maintenance.
Information on selecting appropriate fuses for short-circuit protection.
Steps for choosing the appropriate braking components based on motor power.
To Next Page