Electrical installation
75
Electrical installation
What this chapter contains
This chapter describes the electrical installation procedure of the drive.
WARNING! Only qualified electricians are allowed to carry out the work described in
this chapter. Follow the Safety instructions on the first pages of this manual. Ignoring
the safety instructions can cause injury or death.
WARNING! During the installation procedure, inverter modules may have to be
temporarily extracted from the cabinet. The modules have a high centre of gravity. In
order to minimise the danger of toppling over, keep the support legs (if provided) of
the modules extended whenever manoeuvring the modules outside the cabinet.
Option coding
Some instructions contained within this chapter are intended for drives equipped
with certain options, marked with “plus codes” (e.g. +H359). The options included in
a drive are listed on its type code label. An option code listing is included in this
manual on page 39.
To Next Page
Loading...
